||American Boat Listings™ Listing used boats for sale since 1983.||
1999 Seacraft 23
| Please contact the owner @ 401-322-7474 or firstname.lastname@example.org...1999 SEACRAFT 23
Built by Silver King, FL. |
Full refit in 2011
New Yamaha 250 HP four stroke 4/2011
Warranty until 3/27/2016.
Approximately 470 hours on motor
Full oil/filter/lower unit lube history
Command link gauges
Silent shift prop & spare silent-shift prop
150 gallons fuel , Yamaha 10 Micron fuel filter & shutoff valves.
NOTE: Solid laminate bottom.
Vacuum bagged foam cored topsides , hatches, decks.
PRICE $42,500 with trailer
Location: Rhode Island
( Boat to be sold without the fishing gear and personal items shown in the photos.
New UFlex hydraulic steering cylinder & hoses 4/2011
New Teleflex helm pump 10/2012, remote fill on dashboard face.
½" tempered plexiglass windshield, annealed after bending, edges machine polished
Large 22" windshield wiper with 1.5 gal washer reservoir
Console has full side and back weather curtains
All zip open and roll up
Narrow slot curtain above windshield also zips open
Perimeter weather curtain seals to windshield are equipped with both bulb and foam tape gaskets, and are very watertight.
Console side speaker is wired to the ICOM radio to function as a foghorn using the radio’s built-in foghorn programming.
Original leaky Seacraft side console access hatches replaced 6/2012 with watertight gasketed Starboard hatch by Teak Isle Mfg.
Original hatches included.
SIMRAD 4G broadband radar on Seaview 8" riser pedestal, with 4º downward wedge
SIMRAD high speed GPS antenna.
Hella LED all-around white running light
E-Tec outrigger bases upgraded to adjustable “Sailfish” models in 6/2012.
12' center rigger, 18' E-Tec telescoping outriggers
Original tubular aluminum receivers included.
Fly by wire binnacle and Yamaha Command Link digital gauges
SIMRAD 12" NSE display/GPS/Plotter/ radar/sounder/structure scan
Icom IC-M504 DSC radio slaved to GPS, Digital 6Db antenna
Blue Seas 4 circuit switch/breaker panel for SIMRAD NSE functions
Rule high water alarm annunciator at arrow
Bennett trim tab rocker switches
Edson 14" aluminum wheel with Edson spinner knob
All new circuit breakers and boots in switch panel.
Preventer bar across switches to prevent unintended turn on or off
Auto-Tether kill switch system
Instrument panel weather cover not shown
Ritchie Powerdamp compass, G.
Winther gyrocompass adjusted.
NOTES ON ELECTRONICS:
SIMRAD fluxgate compass ( for radar overlay onto chartplotter display)
SIMRAD 4G Broadband radar module
SIMRAD 4G Radar Antenna
SIMRAD BSM-1 depth sounder module
SIMRAD Structure scan sidescan module
600 Watt/ 20º tilted element/flush mount 50/200Khz transducer- Airmar
Center mounted Structure Scan transducer.
Nautical Designs rigging station
6 aft opening drawers, gasketed/locking doors, locker to port, gasketed door
4 SS rodholders
Tackle storage behind console front cushion.
Gasketed, latched, and watertight.
Top panel slides back 12" to create a larger working surface.
45 QT Yeti/Igloo cooler - not included - fits inside the rigging station.
4 shelf port side locker with gasketed & locking door.
Pliers holder to starboard
Unhook tool holder to port.
Rodholders upgraded with 5/16" shock cords and jam cleats.
Heavy offshore tackle will not jump out of these rodholders.
Coaming bolsters 6/2012.
Danforth galvanized anchor. 150' 5/8" three strand line
Ball lock pin retaining fixture.
All foredeck hatches are gasketed.
Gemlux twistlock latches.
Plastic through hull drains changed to Gemlux stainless, new hoses 2012.
Center hatch twistlock latch.
1.5" livewell overflow ball valve changed 2012, new hoses & AWAB clamps.
Shurflo Blaster raw water washdown pump.
Shurflo livewell supply pump
Rule 750 GPH cartridge type livewell drain pump.
All smoothbore hoses & anti-siphon loops at discharges
Gemlux SS through hull fittings.
OTHER VESSEL DETAILS:
Bottom paint removed 2011
12 mils Interlux Interprotect 2000
Two coats Micron CSC Extra - blue
Two coats Micron CSC Extra - black
2012 - 1 coat - black
2013 1 coat - black
Plastic scuppers removed.
3" G-10 composite tubes potted in WEST 610 epoxy, rubber scupper flaps
2 - Group 27 batteries
00 primary wiring
4 Lee small 30º rodholders in covering boards.
2- Large Lee swivel pin 30º rodholders in covering boards, backing plates.
All manuals/templates/install info for all systems & electronics
SEACRAFT 23 TRAILER
Current registration & RI title
Load-Rite trailer ( estimated 2000 model)
Single axle drum brakes.
Details of 2011-12 rebuild:
2,400# electric Superwinch & power cord
2 new tires 2012
Spare tire, galvanized wheel, carrier, new 2012
New tongue, master cylinder, safety chains.
New steel brake lines & new flexible brake lines
2- new brake backing plates/shoes/hardware/slave cylinders/drums
New rear axle & hubs & lug nuts
4 new I&O wheel bearings and seals
4 - Bearing Buddy grease caps
New spring eye and center shackle bushings and bolts/washers/nuts
New wiring harness and lights
New aluminum diamond plate fenders and mounting hardware
All new rollers, washers, and retaining clips
Spare rollers/washers/retaining clips
Long-stroke Fulton tongue jack.